Product details: included
5 Liquid Bottles (#1, #2, #3, #4, Brush Softener)
1 Crystal Clear
1 French White
1 Pink I
Plus 5 Dip Powder Colors:
- NU 13 Five Alarm Red
- NU 25 Purple Heart
- NU 126 Marvalous
- NU 155 It's Happening
- NU 186 Pep In Your Step
PLEASE NOTE: Due to monitor differences, actual colors may vary slightly from what appears online. Contact us if you would like to see color samples.
READY TO POWDER DIP
Step 1. Apply NUGENESIS NAIL BASE GEL bottle (#2) to ¾ of the nail surface. Apply using a back-to-forward motion to ensure the nail is evenly covered.
Step 2. Dip the nail in NUGENESIS NAIL Crystal Clear (base dip powder) and gently tap away any excess powder that remains on the nail.Tip: As needed you can use a brush to remove any excess powders.
Step 3. Apply NUGENESIS NAIL BASE GEL (#2) to the entire nail surface. Use a back-to-forward motion to ensure the nail is evenly coated.
Step 4. Straighten the customer’s finger and place it down slightly (1/3) into the French dipping Mold filled with French powder. Quickly and gently tap away any excess powder. Tip: Steadily control and push the Mold towards the customer’s finger to create the desired smile line. Do not let the customer control this movement.
Step 5. After step 4, quickly dip the entire nail into the Pink dip powder. Gently tap the finger to remove excess powder.
Step 6. Apply a second coat of NUGENESIS NAIL BASE GEL bottle (#2). Repeat steps 4 & 5 to all 10 nails.
Step 7. Generously apply NUGENESIS NAIL ACTIVATOR LIQUID bottle (#3) and allow to air dry for approximately 30 seconds.
Step 1. Buff all 10 nails (using an electric nail file with a fine sand paper bit or a very fine buffer).
Step 2. Have your customer thoroughly wash & dry their hands before the next step with water only – NO SOAP.
Step 3. Generously apply NUGENESIS NAIL ACTIVATOR LIQUID bottle (#3) and allow to air dry for approximately 15-20 seconds.
Step 4. Apply a light coat of NUGENESIS NAIL FINISH GEL bottle (#4) (from left to right stroke) to all 10 nails. Then repeat using a light second coat and allow to air dry for approximately 2 minutes without touching it. TIP: Do not apply the gel using a back-to-forward motion.